Categories

Social Bookmarks

Bookmark and Share

Vanilla 1.1.4 is a product of Lussumo. More Information: Documentation, Community Support.

We would like to thank you for your interest and valued input in the Leatt Talk forum. We are busy working away at our World Headquarters in Cape Town to bring you a new website and a FAQ based on all your input.
You can view any of the older posts on the forum but cannot make any new ones. We have a new logo, new site and a few other things in the works so please come back and visit us again soon.

The Leatt Team

  1.  Report Post
    I have a mountain bike helmet that does NOT meet "DOT" or "SNELL" standards.

    It is the GIRO "Remedy" helmet (a fiberglass shell with an EVA-lined chinbar, weighing 1,050 grams).

    Although this is a full-face helmet, it is only designed to meet the U.S. Consumer Product Safety Commission's (CPSC) safety standard for BICYCLE helmets.

    Is this helmet compatible with the Leatt Adventure brace, or will I have to replace it with a larger/bulkier DOT/ SNELL certified 'motocross' helmet in order for the brace to FULLY protect my neck?
  2.  Report Post
    Thanks - I just want to be sure because I believe a typical DOT rated motocross helmet is slightly bigger/ bulkier than a typical mountain bike helmet.

    I look forward to your answer.
    • CommentAuthorAufbiks
    • CommentTimeJun 8th 2009
     Report Post
    Hi!
    I am also wondering if adventure leatt brace fits, 661 Pro bravo fullface helmet?

    Cheers
    • CommentAuthorBeefheart
    • CommentTimeAug 13th 2009
     Report Post
    My son is heavily into DH mountain biking and I'm keen for him to have the best possible protection and I'm convinced this should include a Leatt brace. My concern, however, is that, judging by this forum, Leatt customer support has some way to go to match the quality of the product. There seem to be a lot of posts where the Moderator responds with 'Thank you for your question, the Leatt Corporation will respond as soon as possible.' and then the thread dies.

    Specifically, DarreninVancouver had asked about compatibility with the Giro Remedy helmet on 22nd May and hasn't had a reply to date. It's important to me because my son also uses a Remedy and I'm convinced that a brace with an unsuitable helmet is potentially more dangerous (all to do with leverage points) than no brace at all.

    I'd be most grateful for an expedited reply.

    Thank you.
    •  
      CommentAuthorModerator
    • CommentTimeAug 27th 2009
     Report Post

     

    Aufbiks:Hi! I am also wondering if adventure leatt brace fits, 661 Pro bravo fullface helmet? Cheers

     

    DarrenInVancouver:Thanks - I just want to be sure because I believe a typical DOT rated motocross helmet is slightly bigger/ bulkier than a typical mountain bike helmet. I look forward to your answer.

     

    DarrenInVancouver:I have a mountain bike helmet that does NOT meet "DOT" or "SNELL" standards. It is the GIRO "Remedy" helmet (a fiberglass shell with an EVA-lined chinbar, weighing 1,050 grams). Although this is a full-face helmet, it is only designed to meet the U.S. Consumer Product Safety Commission's (CPSC) safety standard for BICYCLE helmets. Is this helmet compatible with the Leatt Adventure brace, or will I have to replace it with a larger/bulkier DOT/ SNELL certified 'motocross' helmet in order for the brace to FULLY protect my neck?

    Unfortunately, Leatt Corporation cannot endorse third party products.

    • CommentAuthorBeefheart
    • CommentTimeAug 28th 2009 edited
     Report Post
    Very disappointing reply from the Forum Moderator. "Unfortunately, Leatt Corporation cannot endorse third party products."

    Potential customers are not asking for an endorsement of any third party products. What we are looking for is advice on whether Leatt's product is compatible with them. Leatt are the only people who can give this information and it's essential for riders who want to have an integrated protection system in place.

    I remain convinced that a neck brace which is not compatible with a rider's helmet or armour presents more risk than not using a brace at all.

    Come on Leatt, see what you can do and if you can't/won't then please explain to customers how they can be sure that they are using YOUR product safely and effectively.
    •  
      CommentAuthorModerator
    • CommentTimeAug 31st 2009
     Report Post

    Thank you for your question, the Leatt Corporation will respond as soon as possible.

    •  
      CommentAuthorModerator
    • CommentTimeSep 3rd 2009
     Report Post

     

    DarrenInVancouver:I have a mountain bike helmet that does NOT meet "DOT" or "SNELL" standards. It is the GIRO "Remedy" helmet (a fiberglass shell with an EVA-lined chinbar, weighing 1,050 grams). Although this is a full-face helmet, it is only designed to meet the U.S. Consumer Product Safety Commission's (CPSC) safety standard for BICYCLE helmets. Is this helmet compatible with the Leatt Adventure brace, or will I have to replace it with a larger/bulkier DOT/ SNELL certified 'motocross' helmet in order for the brace to FULLY protect my neck?

     

    Leatt is currently reviewing all mountain bike full-face helmets and their compatibility with our neck braces, the Giro Remedy helmet has still to be tested and reviewed,  so we unfortunately cannot endorse its use.

    •  
      CommentAuthorModerator
    • CommentTimeSep 3rd 2009
     Report Post

     

    Aufbiks:Hi! I am also wondering if adventure leatt brace fits, 661 Pro bravo fullface helmet? Cheers

     

    Leatt is currently reviewing all mountain bike full-face helmets with there compatibility with our neck braces,  While the 661 bravo helmet has been reviewed and is compatible with our braces, we unfortunately can still not endorse its use.

    •  
      CommentAuthorModerator
    • CommentTimeSep 3rd 2009
     Report Post

     

    Beefheart:My son is heavily into DH mountain biking and I'm keen for him to have the best possible protection and I'm convinced this should include a Leatt brace. My concern, however, is that, judging by this forum, Leatt customer support has some way to go to match the quality of the product. There seem to be a lot of posts where the Moderator responds with 'Thank you for your question, the Leatt Corporation will respond as soon as possible.' and then the thread dies. Specifically, DarreninVancouver had asked about compatibility with the Giro Remedy helmet on 22nd May and hasn't had a reply to date. It's important to me because my son also uses a Remedy and I'm convinced that a brace with an unsuitable helmet is potentially more dangerous (all to do with leverage points) than no brace at all. I'd be most grateful for an expedited reply. Thank you.

    Dear Sir

     

    Leatt Corp wishes to apologise for its late response to certain of our forum questions, we are a well respected, supported brand and strive to provide the customer with the best advice and guidance available. We therefore unfortunately need more time to review certain questions than others.

     

    Leatt Corp hopes to in the future cut down its response time in connection with the forum. 

    As for your question: Leatt is currently reviewing all mountain bike full-face helmets and their compatibility with our neck braces, the Giro Remedy helmet has still to be tested and reviewed, therefore we unfortunately cannot endorse its use.